Skip to content

Sealant dries out on a schedule, whether or not you have punctured

The best tubeless sealant and valves for 2026

Sealant is a consumable with a service interval: it dries inside the tire over a few months whether or not it has sealed anything, which makes bottle volume and cost per refill part of the real comparison rather than a one-off purchase. We compare latex-based against latex-free formulas (the latter matter for anyone sensitive to natural latex), the particle size makers state for sealing larger cuts, the volume recommended per wheel, and valve stem length with removable cores for topping up without unseating a tire.

By

What we recommend

  1. Schwalbe Doc Blue Professional tubeless sealant bottle, 200 ml

    Schwalbe Doc Blue Professional, 200 ml

    A 200 ml bottle of Schwalbe's Doc Blue Professional sealant, sized for preventive use and for tubeless conversion on Schwalbe tires.

    Volume
    200 ml
    Use
    Preventive and tubeless conversion
    Description
    Environmentally friendly, seals small holes and punctures
    Amazon reference
    B0BRKYK322 (identical on 6 markets)
    EAN
    4026495896139
    • Rank 1,224, and the cheapest way into tubeless sealant here
    • A 200 ml bottle, which is roughly one to two wheels depending on tire size
    • Two hundred milliliters does not go far on wide tires

    Best for: A first tubeless setup, or topping up an existing one on road or gravel tires.

    ≈ $73
    Check price on Amazon
  2. SILCA Ultimate tubeless bike tire sealant one liter bottle

    SILCA Ultimate sealant, 1,000 ml, FiberFoam

    A liter of hybrid latex sealant with carbon fiber FiberFoam, sealing punctures up to 7.5 mm (0.30 in) and staying liquid beyond six months.

    Volume
    1,000 ml
    Price per ml
    4.5 cents — the cheapest sealant here
    Base
    Hybrid latex
    Sealing agent
    FiberFoam carbon fibers, "400% stiffer than fiberglass"
    Seals punctures to
    7.5 mm (0.30 in)
    Service interval
    6+ months, weather dependent
    Temperature
    Down to −15 °C (10 °F)
    CO2
    Safe
    Injector
    Sold separately — SILCA’s own holds 59 ml
    Slice figure
    Not published
    Volume per wheel
    Not published
    Latex-free
    No
    Amazon reference
    B0DX2F3V5Q
    EAN
    0810093162901
    • The largest published hole figure on this shelf, 7.5 mm (0.30 in)
    • Six months between top-ups, double the Orange Seal interval
    • No slice figure, where Orange Seal publishes 12.7 mm (0.50 in)

    Best for: A tubeless rider who tops up twice a year and inflates with CO2

    Check price on Amazon
  3. milKit tubeless sealant one liter bottle

    milKit Tubeless sealant, 1000 ml

    A liter bottle of sealant stated not to clump into rubber lumps inside the tire, non-allergenic, and specified from -20 °C (-4 °F).

    Volume
    1000 ml
    Behavior
    Does not clump into rubber lumps
    Allergens
    Non-allergenic
    Temperature
    Works from −20 °C (-4 °F)
    Amazon reference
    B07YJM5JPC (identical on 6 markets)
    EAN
    7640174460342
    • Non-clumping, which is the single most annoying failure of latex sealants
    • Non-allergenic, which matters for anyone sensitive to natural latex
    • A liter is a large commitment for one bike

    Best for: Winter riding, latex sensitivity, or a household running several tubeless bikes.

    ≈ $47
    Check price on Amazon
  4. Orange Seal Endurance tubeless tire sealant 16 oz refill bottle

    Orange Seal Endurance sealant refill, 473 ml

    A 473 ml refill of latex Endurance sealant, sealing punctures to 6.35 mm (0.25 in) and slices to 12.7 mm (0.50 in), with 60 to 120 days between top-ups.

    Volume
    16 oz (473 ml)
    Price per ml
    4.9 cents
    Base
    Latex, with nanite particles
    Seals punctures to
    1/4" (6.35 mm (0.25 in))
    Seals slices to
    1/2" (12.7 mm (0.50 in))
    Service interval
    60–120 days between top-ups
    Durability claim
    2–3× longer than standard sealants
    Casing
    No delamination or rubber damage, stated
    Injector
    Not included — the 8 oz kit here has one
    Shipping weight
    118 g (4.2 oz) on the record, which is impossible for 473 ml
    Temperature range
    Not published
    CO2
    Not addressed
    Amazon reference
    B015M09IQ4
    EAN
    0810026601101
    • The only sealant on this shelf to publish a slice figure as well as a hole figure
    • A service interval given as a range, 60 to 120 days, rather than a ceiling
    • No injector — buy the 8 oz kit first, then refill with this

    Best for: Topping up an Orange Seal setup already equipped with an injector

    Check price on Amazon
  5. Muc-Off No Puncture Hassle tubeless sealant, one liter bottle

    Muc-Off No Puncture Hassle sealant, 1 L

    The best-selling sealant here: a liter stated to seal holes up to 6 mm (0.24 in), lasting up to six months in moderate climates, with a UV dye for finding leaks.

    Volume
    1 liter
    Seals to
    6 mm (0.24 in)
    Service life
    up to 6 months in moderate climates
    Extra
    UV detector dye
    Amazon reference
    B07DNP89TD (identical on 6 markets)
    EAN
    5037835825008
    • Rank 707, the best-selling sealant here
    • A published maximum hole size — 6 mm (0.24 in) — which is the figure that decides whether a cut seals
    • The manufacturer states up to six months, which is a service interval you have to keep

    Best for: Mountain bike and gravel riding, where the cuts are larger and the 6 mm (0.24 in) figure is the one that matters.

    ≈ $74
    Check price on Amazon
  6. Orange Seal Endurance tubeless sealant 8 oz bottle with injector

    Orange Seal Endurance 237 ml + injector

    A 237 ml bottle of latex Endurance sealant with an injector, sealing punctures to 6.35 mm (0.25 in) and slices to 12.7 mm (0.50 in).

    Volume
    8 oz (237 ml)
    Injector
    Included — capacity not published
    Price per ml
    8.2 cents, against 4.9 for the 473 ml refill
    Base
    Latex with nanite particles
    Seals punctures to
    1/4" (6.35 mm (0.25 in))
    Seals slices to
    1/2" (12.7 mm (0.50 in))
    Service interval
    60–120 days
    Weight
    227 g (8 oz)
    Casing
    No delamination or rubber damage, stated
    Particle size
    Not published
    Temperature range
    Not published
    CO2
    Not addressed
    Amazon reference
    B07YF3JQF8
    EAN
    0810026608100
    • The only item here that supplies both sealant and injector
    • Publishes both a hole figure and a slice figure, alone on this shelf
    • 8.2 cents a milliliter against 4.9 for the same sealant in 473 ml

    Best for: A first tubeless setup, with the 473 ml refill bought next time

    Check price on Amazon
  7. Park Tool TSI-1 blue tubeless sealant injector syringe

    Park Tool TSI-1 sealant injector, 100 cc, gauged

    A 100 cc syringe-style sealant injector with a graduated barrel, for any injectable sealant through a Presta valve with a removable core.

    Capacity
    100 cc (3.5 fl oz)
    Gauge
    Yes — the only one here
    Sealant compatibility
    Any injectable sealant, no exclusions stated
    Valve
    Presta with a removable core
    Also for
    Removing old sealant as well as injecting
    Weight
    100 g (3.5 oz)
    Price
    $28.90 — the most expensive injector here
    Hose length
    Not published
    Valve core tool
    Not included
    Schrader
    Not addressed
    Amazon reference
    B097F1XV7D
    EAN
    0763477008275
    • A graduated barrel, which is the only way to dose consistently
    • States no sealant exclusions, unlike both Thinvik injectors here
    • $28.90 — nearly three times the cheapest injector on this page

    Best for: A workshop or anyone who wants the same measured dose in both wheels

    Check price on Amazon
  8. Thinvik tubeless sealant injector kit with valve cores and caps

    Thinvik Injector kit, 100 ml, 6 valve cores

    A 100 ml tubeless sealant injector with a 200 mm (7.87 in) hose and switch, a core removal tool and six nickel-plated spare valve cores.

    Capacity
    100 ml (3.5 oz)
    Hose
    200 mm (7.87 in), with an on-off switch
    Core removal tool
    Included, CNC
    Spare valve cores
    6, nickel-plated brass
    Valve caps
    6 — black, red and silver
    Valves
    Presta and Schrader cores
    Excluded sealants
    Finish Line and others with large particles
    Stated job time
    Under 3 minutes, in five steps
    Reusable
    Yes — rinse with water
    Gauge
    None
    Core thread size
    Not published
    Amazon reference
    B0986X5LVS
    EAN
    0750139769773
    • Six spare valve cores, the part that seizes in dried latex
    • A 200 mm (7.87 in) hose with a tap, so it disconnects from a pressurized tire
    • No gauge, on a shelf where no maker publishes a dose

    Best for: A tubeless setup serviced regularly, where a seized core should not stop work

    Check price on Amazon
  9. Thinvik tubeless sealant injector syringe with hose and core remover

    Thinvik Sealant injector, 100 ml, 200 mm (7.87 in) hose

    A 100 ml sealant injector with a 200 mm (7.87 in) hose and a CNC valve core remover for both Presta and Schrader cores.

    Capacity
    100 ml (3.5 oz) — one MTB tire in one pull
    Hose
    200 mm (7.87 in), with an openable valve
    Core removal tool
    Included, CNC — Presta and Schrader
    Compatible sealants named
    Stan's No Tubes, Orange Seal, Slime
    Excluded sealants
    Finish Line and others with large particles
    Price
    $9.99 — the cheapest injector here
    Gauge
    None
    Spare valve cores
    None — the kit version has six
    Drawing sealant out
    Not stated
    Barrel material
    Not published
    Amazon reference
    B07W51FM45
    EAN
    0192188484823
    • The clearest dose statement on this shelf: about 100 ml for a mountain bike tire
    • A published 200 mm (7.87 in) hose, which neither the Park Tool nor the SILCA gives
    • No gauge, so doses cannot be measured, only filled

    Best for: A single tubeless bike, and the cheapest way to top up through the valve

    Check price on Amazon
  10. SILCA Ultimate tubeless sealant injector syringe

    SILCA Sealant injector, 59 ml, for SILCA sealant

    A reusable 59 ml sealant injector engineered for SILCA’s fiber-loaded sealant, injecting through a Presta valve core.

    Capacity
    2 oz (59 ml) — the smallest here
    Engineered for
    SILCA Ultimate sealant with FiberFoam
    Valve
    Presta, through the core
    Reusable
    Yes — rinse clean
    Price
    $11.99
    The other makers on the site’ sealant
    Not addressed
    Hose length
    Not published
    Gauge
    None
    Valve core tool
    Not included
    Reference
    AM-AC-059-parent — shared with the 1 L sealant
    Amazon reference
    B0DWXZJ9LV
    EAN
    0810093162932
    • The only injector here explicitly engineered for fiber-loaded sealant
    • Complete step-by-step instructions, including the tip-seating warning
    • 59 ml, so a mountain bike tire takes two pulls

    Best for: A road tubeless setup running SILCA’s own fiber sealant

    Check price on Amazon

For which need, in tubeless sealant and valves

Setting up and maintaining several wheels

Sealant is used up on fitting and is renewed regularly. A large volume works out markedly cheaper to top up.

milKit DS

A top-up

A small volume is enough to top up a wheel whose sealant has dried, which is the most frequent operation.

Muc-Off 825

For whom, within tubeless sealant and valves

Mountain bike and gravel
This is where tubeless brings the most: low pressures without pinching and small punctures sealed while riding.
Road
Road tubeless calls for more demanding fitting and compatible rims. The benefit is real and less spectacular.
Upkeep
Sealant dries out within months. A wheel never topped up loses all sealing ability without warning.

What each advantage costs, on tubeless sealant and valves

Sealing against upkeep
Tubeless removes most punctures and requires the sealant to be renewed regularly. It is maintenance, not a permanent installation.
Sealant volume against weight
More sealant seals bigger holes and adds rotating weight. The recommended doses by section are a good starting point.
Long valve against deep rim
A valve that is too short on a deep rim does not leave enough length for the pump head. It is a strict fitting constraint.

Before buying tubeless sealant and valves

How often should sealant be renewed?

It dries out within months depending on the climate. A wheel with dry sealant no longer seals anything, and nothing signals it.

How do I check the level?

By removing the valve core and probing with a thin rod, or by shaking the wheel to hear the liquid. Silence means a dry wheel.

Do I need a compressor to fit?

Seating the bead needs a violent burst of air. A pump with a compression chamber is enough in most cases.

Can an inner tube go into a tubeless tire?

Yes, it is the intended get-you-home fix when the sealant does not seal. Remove the tubeless valve core before inserting the tube.

Does sealant damage the rim?

Some sealants attack aluminum over time if they dry out completely. Cleaning at each renewal prevents the build-up.

How do I repair a big cut?

With a tubeless plug inserted from the outside. Beyond that, you need an inner tube to get home.

Do I need specific rim tape?

Airtight tubeless tape is essential: ordinary rim tape lets air out through the spoke holes.

Can you carry an inner tube as a tubeless backup?

Yes, and it is the usual escape route: remove the valve, wipe out, fit the tube. The remaining sealant messes up the tube without stopping it from holding.

What to remember about tubeless sealant and valves

Sealant dries out within months and a dry wheel no longer seals anything, without signaling it: shake the wheel to hear the liquid. Remove the valve core before inserting a tube as a get-you-home fix, and airtight tubeless tape is not optional.

A quick look at tubeless sealant and valves

  • Price: $9.99 to $28.90, on 3 of the 10 models.
  • Price per ml: 4.5 to 8.2 cents, on 3 of the 10 models.
  • Seals punctures to: 1 to 7.5 mm (0.30 in), on 3 of the 10 models.

Tubeless sealant and valves, side by side

There is no table here, and the reason is in the listings. The figure published most often across these 10 products is volume, given by 6 of them — short of the four in five a column needs to compare rather than to display gaps. Each product page says what its own maker published.

Sources and how we rank

Specifications: manufacturer sheets for bike gear and the matching Amazon product pages. Prices and availability: Keepa.

Most recent revision in this category: October 6, 2026.

How we assess tubeless sealant and valves

Prices quoted in these summaries are dated readings. The live price is shown next to each product.