Skip to content

Büchel Mini bell, 35 mm (1.38 in), 100 dB vs JATEKA Mini alloy bells, 100 dB, pair

One bell, or two?

Both state 100 dB and both cost very little. The difference is that one publishes the bar diameters it fits and the other publishes a quantity — and in several European countries a bell is not optional.

Büchel mini bicycle bell in black mounted on a handlebar

Büchel Mini bell, 35 mm (1.38 in), 100 dB

7.5/10

Wins 3 of 6

Check price

≈ $42

JATEKA pair of mini aluminum bicycle bells in black

JATEKA Mini alloy bells, 100 dB, pair

7.5/10

Wins 2 of 6

Search Amazon

Measure against measure

Compared on Mini bell, 35 mm (1.38 in), 100 dB Mini alloy bells, 100 dB, pair
Quantity 1 2
Loudness Up to 100 dB stated 100 dB stated
Bar diameters 21.8 and 28 mm (1.10 in), with rubber inserts Not published
Dome diameter 35 mm (1.38 in) Not published
Materials Waterproof, rustproof steel Aluminum alloy and ABS, stainless steel striker
Listed on amazon.com Yes No

A tick marks the better answer on that line only. Counting ticks does not decide the page — the two verdicts below do, because these products answer different questions.

Which of the two, for which rider

Buy the Mini bell, 35 mm (1.38 in), 100 dB

The one you can order without measuring twice. Two stated bar diameters with rubber inserts covers most of what a household has, and a 35 mm (1.38 in) dome tells you how much bar space it needs. Steel described as waterproof and rustproof is the right material for a part that lives outdoors permanently.

Mini alloy bells, 100 dB, pair

No amazon.com listing was found for this one. We hold references for other markets but none for the United States, so it may not be buyable here — which is the first thing to weigh against anything below.

Two bells for the price of one, in aluminum alloy with a stainless striker — a sensible material combination for something exposed to rain. It publishes no bar diameter, which on a bell is the specification that decides fit, so measure where it will actually sit and confirm with the seller.

The questions riders ask

Where do I measure the bar?

Where the bell will actually sit, not at the stem. Many flat bars are 22.2 mm (0.87 in) at the grips and 31.8 mm (1.25 in) at the clamp, and a bell for one will not fit the other.

Is a bell legally required?

In several European countries, yes, and the requirement is national — Germany and the Netherlands are among those requiring one. Read the rules for where you ride.

Does 100 dB mean anything useful?

It is a manufacturer statement measured at an unstated distance, so it is not comparable between makers in the way a lux figure is. Both of these state the same number, which tells you they are in the same class rather than which is louder.

The full page on each