Clamping the seatpost is safe; clamping a frame tube is not always · review
Tarpofix Repair stand for e-bikes, 50 kg (110.2 lb) review
The e-bike stand of this hub: 50 kg (110.2 lb) rated, adjustable from 98 to 155 cm (38.6 to 61 in) in powder-coated steel, weighing 8 kg (17.6 lb) and folding.
Our conclusion The one to buy for an e-bike. Published load, published range, and enough steel to mean it.
Tarpofix’s stand is the one in this hub built for the weight of a modern e-bike.
What the manufacturer publishes
An ergonomic design, height adjustable from 98 cm (38.6 in) to 155 cm (61 in). Increased load capacity through a powder-coated steel construction with additional reinforcement. Simple one-hand operation to fix and release the bike. Light, foldable and mobile at 8 kg (17.6 lb) with a folding design. A stated capacity of 50 kg (110.2 lb) for e-bikes.
Why 50 kg (110.2 lb) is the number
An e-bike weighs roughly twice what its non-assisted equivalent does — the battery and motor account for most of it. A stand rated at 30 kg (66.1 lb) is at its limit with one on it, and stands do not fail gracefully. Fifty gives real margin.
The 8 kg (17.6 lb) own weight
The trade for steel and capacity. It is a stand you set up where the bike is rather than carry around a garden. Folding helps for storage rather than portability.
The clamping rule, and it matters more on an e-bike
An e-bike’s frame tubes are often oversized and shaped around a battery. Check where the manufacturer says a stand may clamp, and prefer the seatpost. On any bike, carbon frames and posts carry clamping limits and sometimes prohibitions — that is the maker’s instruction and it governs.
What we rate and what we flag
Strengths
A published 50 kg (110.2 lb) rating and a published 98–155 cm (38.6 to 61 in) range — the two figures that matter, both stated
One-handed clamp operation, which matters when the other hand is holding a heavy bike
Rank 1,961, the second best-selling stand here
Compromises
Eight kilograms is heavy to carry to where the bike is
Steel rather than the aluminum of the stand above it
More stand than a light road bike needs
Where this model is listed
A listing is not an offer: the reference exists on these stores, availability changes daily.
France
Germany
Italy
Spain
United Kingdom
United States
Specifications
Rated load
50 kg (110.2 lb) stated
Height range
98–155 cm (38.6 to 61 in)
Construction
Powder-coated steel
Own weight
8 kg (17.6 lb)
Operation
One-handed clamp
Amazon reference
B0FLF4C5RX (identical on 6 markets)
EAN
4068196005397
The questions riders ask
Will it hold an e-bike?
Tarpofix states 50 kg (110.2 lb), which covers e-bikes at 22–28 kg (48.5 to 61.7 lb) with substantial margin. That figure is a manufacturer specification to verify against your own bike rather than a guarantee this site can make.
How high does it go?
Ninety-eight to one hundred and fifty-five centimeters, which covers working seated and standing, and brings a bottom bracket to chest height.
Our score
7.8/ 10
The one to buy for an e-bike. Published load, published range, and enough steel to mean it.
Who buys this one, among bike gear
E-bikes and heavy touring bikes, where 30 kg (66.1 lb) ratings are not enough.
Specifications: the manufacturer sheet for bike gear and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
Aluminum alloy · 100–160 cm (39.4 to 63 in) · 360° clamp · folding
The best-selling stand here: an aluminum alloy repair stand adjustable from 100 to 160 cm (39.4 to 63 in) with a 360° rotating clamp, described as light and folding.
Best for: A well-made general-purpose stand for a garage, from the model most people successfully use.