The original yellow road cleat, with 6 degrees of float
The genuine yellow Shimano SPD-SL cleat set with 6 degrees of float and blue, yellow and red wear points.
The genuine yellow Shimano SPD-SL cleat set with 6 degrees of float and blue, yellow and red wear points.
Best for: Road riders who want the original cleat.
Road cleats are a wear item. The yellow SM-SH11 is the version most road riders use, because the float forgives small position errors.
For SPD-SL, 6-degree float, yellow, designed to match the rigidity of Shimano SPD-SL pedals, with a walkable design and blue, yellow and red ground contact points that show wear.
The NAACOO cleats on this shelf cost less and are sold as compatible. If you ride with a fresh cleat and care about a precise engagement, the original is the safe choice. Cheap cleats often wear faster, but we have not measured that here.
Mark your old cleat position on the shoe with a pen before you take it off. Tighten the bolts evenly, following the torque printed on the shoe sole.
Your foot can rotate slightly while clipped in. That can ease pressure on the knee.
Shimano uses colored contact points that show wear. Replace them before the cleat engages loosely.
Road riders who want the original cleat.
At $20, it sits -29 % against the $28 median of the 5 models in this category published here.
Details checked on October 31, 2026.
Specifications: the manufacturer sheet for pedals and cleats and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
Shimano's PD-EH500 with SPD on one face and a flat platform on the other, cleats included.
Best for: A commuter or touring bike ridden sometimes in cycling shoes and sometimes in whatever you happen to be wearing.
Road cleats compatible with Shimano SPD-SL pedals in the SH10, SH11 and SH12 patterns, in polycarbonate and TPU with titanium steel bolts.
Best for: Replacing worn road cleats on three-bolt shoes, which is a routine consumable purchase.
A wide flat pedal in aluminum with sealed bearings and a chromium-molybdenum spindle, on a 9/16 inch thread.
Best for: Everyday riding in normal shoes.
A corner-gripping clamp phone mount with a mechanical safety latch, for phones up to 6.8 inches on handlebars from 15 to 40 mm (0.59 to 1.57 in).
Best for: Any handlebar at all, where a mechanical latch is worth 7 oz (198 g)
An out-front handlebar phone mount with a dual-stage twist lock, reversible above or below the stem, for four handlebar diameters.
Best for: A rider who will buy the case too, and wants a lock that cannot shake loose
A pair of silicone strap phone mounts for screens between 4.0 and 6.5 inches, fitting any handlebar without tools.
Best for: Two bikes that each need a mount, for a phone of 6.5 inches or less
Prices quoted in these summaries are dated readings. The live price is shown next to each product.
