Fanttik sells the X9 Pro mainly as a car tool, but it has what a bike owner wants at home: a set pressure, an auto-stop, and no pumping.
What the listing publishes
A 150 psi maximum, a 7.4 V 2.5 Ah battery, up to 23 minutes of continuous use, 4+N modes, auto-stop, a built-in hose you pull out, and a weight of 1.2 lb. Fanttik says it refills a compact car tire from 30 to 35 PSI in a minute.
What matters on a bike
Bike tires have small volumes, so a car inflator fills them quickly. The risk is overshoot: a fast pump can run past a target of 30 psi on a small tire. Set the target slightly below, stop, and check with a gauge the first few times.
What to check before you buy
Check the valve adapter in the box against your bikes. Presta needs an adapter on many car-focused inflators, and the bullets we read do not list the accessories in detail.
What we rate and what we flag
Strengths
Hose built into the body, so there is nothing to lose
Auto-stop at the set pressure
A stated 23 minutes of continuous run
Compromises
Pitched for cars, so Presta use depends on the adapters
Heavier than a mini pump
Hard to carry on a road ride
Specifications
Maximum pressure
150 psi
Battery
7.4 V, 2.5 Ah
Continuous run
Up to 23 min
Modes
4+N with auto-stop
Hose
Integrated
Weight
1.2 lb
Size
2.91 × 1.81 × 7.87 in
Model
X9 Pro
The questions riders ask
Does it reach road bike pressures?
Fanttik states a maximum of 150 psi, which is above road bike pressures.
Is it for carrying on a ride?
It weighs 1.2 lb and measures almost 8 inches long, so it suits a car or a garage better than a jersey pocket.
Our score
8.0/ 10
A garage inflator that works on bikes as a side job.
Who buys this one, among bike gear
Keeping in a car or garage for both car and bike tires.
Sources
Specifications: the manufacturer sheet for bike gear and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
150 psi · 19 mm (0.75 in) die-cast cylinder · 25% faster stated · up to 10 tires
A compact compressor with a 19 mm (0.75 in) die-cast cylinder supporting up to 150 psi, a magnetic motor the maker states is 25% faster, and up to ten tires per charge.
Best for: A household compressor with the pressure headroom for road tires and the capacity for a car.